AudioBahn MULTIFUNCTIONAL SOURCE UNIT A3351 - Manual (Page 15)

Adjusting A-Bass
Adjusting Source Level
Mute
Figure 1.4 Characteristics of A-Bass
1) Press the [A-BASS] button repeatedly until the desired bass level (1,2 or 3) appears
in the display.
2) To cancel, select “A-Bass OFF”.
If the difference in volume level of CD, CHANGER(CD/DVD), AUX and TUNER is too
much, you can compensate the volume by adjusting each source level. First, set the
desired volume level for the TUNER mode, then adjust the volume level of each source.
1) Select TUNER mode and tune a station to check the desired volume level.
2) Press the [SOURCE] button to select the source you wish to adjust. Then press and
hold the [A-BASS] button for more than a second to enable adjustment mode.
3) You can adjust the level of the selected source by turning the Rotary Encoder.
Default : 0 Setting Range : -4 to +4 (1.25dB per step)
Note: The gain level of the TUNER can not be adjusted.
Press [MUTE] to mute the audio volume. Press [MUTE] again to revert to the
previous volume level.
Note In order to pause a CD or the CD/DVD Changer,
press the [PAUSE]button.
Basic Operation
13