Standard product warranty, Warranty limitations, Product specific warranty “powerhold – Poweramp POWERHOLD SC SERIES User Manual

Page 56: Series vehicle restraint

Advertising
background image

STANDARD PRODUCT WARRANTY

SYSTEMS, INC. warrants that its products will be free from defects in design, materials and

workmanship for a period of one (1) year from the date of shipment. All claims for breach of this warranty

must be made within 30 days after the defect is or can with reasonable care, be detected. In no event

shall any claim be made more than 30 days after this warranty has expired. In order to be entitled to the

benefits of this warranty, the product must have been properly installed, maintained and operated in

accordance with all manufacturer’s recommendations and/or specified design parameters and not

otherwise have been subject to abuse, misuse, misapplication, acts of nature, overloading, unauthorized

repair or modification, application in a corrosive environment or lack of maintenance. Periodic

lubrication, adjustment and inspection in accordance with all manufacturers’ recommendations are the

sole responsibility of the Owner/User.

In the event of a defect, as determined by SYSTEMS INC., covered by this warranty, SYSTEMS INC.

shall remedy such defect by repairing or replacing any defective equipment or parts, bearing the cost for

the parts, labor and transportation. This shall be exclusive remedy for all claims whether based on

contract, negligence or strict liability.

WARRANTY LIMITATIONS

THE ABOVE WARRANTIES ARE IN LIEU OF ANY OTHER WARRANTIES, WHETHER EXPRESSED

OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY

OR FITNESS FOR A PARTICULAR PURPOSE. SYSTEMS INC. AND ITS SUBSIDIARIES SHALL NOT

IN ANY EVENT BE LIABLE TO ANYONE, INCLUDING THIRD PARTIES, FOR INCIDENTAL,

CONSEQUENTIAL OR SPECIAL DAMAGES OF ANY KIND INCLUDING BUT NOT LIMITED TO,

BREACH OF WARRANTY, LOSS OF USE, LOSS OF PROFIT, INTERRUPTION OF BUSINESS OR

LOSS OF GOODWILL.

PRODUCT SPECIFIC WARRANTY

“PowerHold

®

” SERIES VEHICLE RESTRAINT

In addition to the “Standard Product Warranty” provided with all Poweramp® Products, Systems Inc.,

guarantees materials, components and workmanship to be free of defects for the following extended

periods:

• Structural Warranty – For a period of five (5) years from the date of shipment, this warranty

specifically applies to; restraint shoe, pivot pin and frame weldment only.

• Hydraulic Warranty – For a period of two (2) years from date of shipment, this warranty

specifically applies to; the hydraulic pump and motor, all hydraulic cylinders, hydraulic pressure

lines, fittings and valves only.

• Electrical Warranty – For a period of two (2) years from date of shipment, this warranty

specifically applies to; the control box components, proximity switches, coils and proximity

sensor when interlocked with a Poweramp® leveler only.

Advertising
This manual is related to the following products: