Important notice – Teledyne PEM-9004 - Portable emissions analyzer User Manual
Page 4
PEM-9004
Teledyne Analytical Instruments
iv
Important Notice
The PEM-9004 is a gas analysis computer for measuring and
computing the concentration of various gases in a combustion process.
Both toxic and combustible gasses may at times be present in and
around the analyzer. This instrument is designed to safely handle
specific combustible gas mixtures as outlined in the product
specification. Since Teledyne cannot control the end use of this
instrument, it is the responsibility of the user to establish whether or not
the total system of instrument, environment, alarm components, and any
other relevant devices actually will assure safety under the particular
circumstances of use.
Location of the equipment and sensors that will insure proper
operation is the responsibility of the user.
The safety checklist outlined below is only a guide. It is up to the
user to establish practical safety precautions given his/her own specific
circumstances. It is vital that the operator understand and test the
operation of the total system.
Safety Checklist
Verify that the instrument is powered correctly.
Verify that the instrument works properly (all functions).
Verify that measured values are correct.
Verify that unauthorized personnel cannot tamper with the
instrument or its auxiliary equipment.
Institute routine test/calibration procedures.
Identify and handle any potential problems in sampling or
location.
Train all operators to understand all operations and functions
of the analyzer and the system.
Identify and handle any environmental or other influences that
could affect the operation of the instrument.