Teledyne PEM-9004 - Portable emissions analyzer - Manual (Page 40)

Operation PEM-9004
Teledyne Analytical Instruments 28
•
Use the arrow keys to select the character to enter then press
OK. The cursor moves to the next position. Repeat the process
to enter or edit the correct address line. Each line is entered
separately. When the line is correct, press ENTER to save the
result or CLR to cancel the input. The editing screen
disappears.
Note: The cycle key can be used to toggle between caps, lower
case and numerical input.
•
Use the arrow keys to move the highlight to the next line for
editing. Press OK and the editing window opens. Repeat the
above procedure to enter the user address line by line pressing
ENTER after each line is completed.
•
After the final line is entered and saved you will be returned to
the Settings screen.
4.4.3.5 A UTOMATIC T IMER
The PEM-9004 is equipped with automatic timers that will turn off
the display illumination and/or shut the instrument off to conserve
battery power. Both automatic features operate independently and
initiate if no key press is detected within the user-specified intervals.
To set the automatic power off feature:
•
Use the cycle button to highlight the Auto Off line on the
screen then press OK.
•
Use the arrow keys to increase or decrease the interval. Press
ENTER to save the setting or CLEAR to cancel the input.
Note: The Auto Off interval can be set in 5 minute intervals from
0 to a maximum 60 minutes.
The automatic shut off feature is disabled if an interval is
set to 0 minutes.
To set the automatic backlight off feature:
•
Use the cycle button to highlight the Illum. Off line on the
screen then press OK.