Aristokraft LD425C - Manual (Page 66)

Copying
44
2
Note
❒ The width of the Color to be deleted can be adjusted in five levels. If the
Color width is set to [Wider] and red has been specified, Colors, which are
close to magenta or orange, will also be deleted. The Color width can be
adjusted in User Tools. See “Color Sensitivity”, General Settings Guide.
❒ You can cancel the selection by pressing the selected (highlighted) key in
step C .
❒ When the Full Color Copy is selected, the full Color counter will advance
to “1”. When the Black/White is selected, the mono-Color counter will ad-
vance to “1”.
Color Background
Copies by adding a Color in the whole page.
Important
❒ Since the Color Background function overprints the entire original, the Color
of the image may change.
A
Press [Edit / Color].
B
Make sure that [Color] is selected before pressing [Color Background].
C
Select the background Color, and then press [OK] twice.
You can adjust the density of each Color in four steps.
To select User Color, press [User Color], and then select the Color.
D
Place the originals, and then press the {Start} key.
Note
❒ You can cancel the selection by pressing the selected (highlighted) key in
step C .
❒ When the Full Color Copy is selected, the full Color counter will advance
to “1”. When the Black/White is selected, the mono-Color counter will ad-
vance to “1”.