Aristokraft LD425C - Manual (Page 97)

Copier Functions
75
2
Changing the Number of Sets
You can change the number of copy sets during copying.
Important
❒ This function can only be used when the Sort function is turned on.
A
While “ Copying... ” is displayed, press the {Clear/Stop} key.
B
Press [Change Quantity].
C
Enter the number of copy sets with the number keys, and then press the
{q} key.
D
Press [Continue].
Copying starts again.
Note
❒ The number of sets you can enter in step C differs depending on when the
{Clear/Stop} key is pressed.