Ransburg REA III Auto Applicator 70393 - Manual (Page 35)

AA-82-01.3 3 2 3 2 3 2 3 2 3 2
REA III 100kV Automatic Applicator - Maintenance
2. Assembly:
a. Remove the cable retaining ring from the
new cable as in the “Disassembly
Procedure”.
b. Place retainer [32] over the end of the new
cable.
c. Place the cable retainer ring over the end
of the cable and with a blade, lift one end
of it into its groove and spiral it into place.
d. Insert the high voltage cable into the
resistor housing and secure with retainer
[32].
N O T E S N O T E S N O T E S N O T E S N O T E S