RECON 264146 RAM Cab Light (Dodge) - Manual (Page 15)

15 | P a g e
Connecting To Your Factory Power and Ground
This Step Will Range From Each 3rd Gen Model Ram, A Voltage Meter Is Great Tool To Locate The
Factory Cab Light Wires
Finding The factory Harness:
-On The Passenger Side Pillar, Locate The Factory Harness That Supplies Power To You Cab Lights.
(Mounted on Pillar)
-Using Your Voltage Meter Determine Which Wire Is Your Cab Lights (Power Only Supplied When
Running Lamps Are On) This Model Was The Top Two Wires (black = Ground, Grey/white = Power)
-Snip Only The Wires You Need To Supply Your Cab Lights
Wiring To Factory Power and Ground
-With The Two Wires Exposed, Strip The Wires And Crimp Insulated Disconnect Connectors (Any
Connectors Will Suffice)
-Connect The Connectors Together - Tape Any Exposed Areas To Prevent Grounding
-Re Clip The Rest Of The Harness Back To Pillar, And Tuck Wires Into Dash.