RECON 264146 RAM Cab Light (Dodge) - Manual (Page 7)

7 | P a g e
*** On This Application I Started My Tape Measuring From The Driver Side ***
Read Carefully! :
With This Application I Found The factory Spec Measurements On The Cab Lights And Changed Them To
Suit My Needs. You Can Alter The Position of The Lights Anyway You Would Like - As Long As You
understand How This Measuring Method Works.
With The Two Different Tape Measures This Will Allow You To Get The Exact, Front Facing
Measurements To Create The "OEM Look".
The Top Tape Measure At 6" Above The Windshield (The Thicker Tape Measure) Measured At 53" (or
55", But 3" Is Stuffed In The Door To Allow It To Hold).
The Bottom Tape Measure (The Thinner One) Was Wider At 55" (or 58", With 3" Stuffed In Door)