SilverStone TS432U - Manual (Page 21)

TS432U
20
ENGLISH
1. Load the source and target HDD and select “Compare HDD” using the arrow button.
The following screen will be displayed:
The “Compare HDD” function performs a comparison of data from the source hard drive to the data on the
target hard drive
When the “Compare HDD” is completed, a job status screen will be displayed
3. Press ENT and “Compare HDD” will commence. The system will auto-detect the hard drives.
During the “Compare HDD” process, the TS432U will display progress information
2. Press ENT to confirm.
Duplicator Mode User Guide
Operation
Main menu: Compare HDD
Note:
if the target drive differs from the source drive, the TS432U will beep and report each LBA that is
different. Please turn the TS432U off and compare each target drive individually to determine
which one is different.
Note:
When compare is complete, TS432U
will beep 5 times to indicate it is
finished, press ESC to stop the beep.