SilverStone TS432U - Manual (Page 23)

TS432U
22
ENGLISH
1. With the source HDD loaded, use the arrow buttons to select “Source Size”, the following screen will be
displayed.
The “Source Size” function is used to display the capacity of the source hard drive.
2. Press ENT to display the capacity of the source hard drive
Duplicator Mode User Guide
Operation
Main menu: Source Size
1. Select “Setup” using the arrow button. The following screen will be displayed:
The “Setup” menu contains configuration options for the TS432U.
It is suggested to use the factory defaults setting for optimum performance
Main menu: Setup
Note:
after changing any of the configuration options, press ENT to save the change.