SKC DataTrac for the Pocket Pump - Manual (Page 18)

16
SKC Pump Program Settings Window
SKC Pump Program Settings Window
The SKC Pump Program Sett ings window (Figure 27) allows the user to select run time options. The run time options
include User Lock Out, Temperature units (F or C), Pressure units (inches H
2
O or mm Hg), Reset Volume/Time, Reset
Minimum and Maximum temperatures, and Clear History. The run time options take eff ect when the pump program
is sent to the pump from the Pump Program Scheduler window.
Attention! All activated options will take eff ect when a schedule from the Pump Program Scheduler (Figure 11) is sent to the pump
by clicking the ToPump butt on (Figure 12).
Buttons Functions
User Lock Out ......................click once on YES to activate or NO to deactivate; User Lock Out will prevent any
one from altering pump operating parameters even if the security code is entered
on the pump keypad, however, the operator will be able to scroll through the data
display. Default is NO.
Temp Units ...........................click once to select Fahrenheit or Celsius scale. Default is Fahrenheit.
Pressure Units ......................click once to select inches H
2
O or mm Hg scale. Default is inches H
2
O.
Reset Vol/Time .....................click once on YES to activate or NO to deactivate; YES will reset the volume pumped
and time duration to zero (0). Default is YES.
Reset Min, Max Temps .......click once on YES to activate or NO to deactivate; YES will reset the minimum and
maximum temperatures to zero (0). Default is YES.
Clear History ........................click once on YES to activate or NO to deactivate; YES will reset pump history.
In general, it is good practice to clear the history before running a new schedule.
Default is NO.
To set the values and return to the SKC Pump Scheduler window, click once on the OK butt on. Create a schedule
and send it to the pump by clicking the ToPump butt on (Figure 12).
Figure 27. SKC Pump Program Settings Window Showing Default Settings