SKC DataTrac for the Pocket Pump - Manual (Page 7)

5
SKC DataTrac Pump Manager Window
SKC DataTrac Pump Manager Window
The SKC DataTrac Pump Manager window (Figure 3) is the fi rst window that opens in DataTrac. All other windows
are accessible from this main window.
SKC DataTrac Pump Manager Window Menus
File Menu
Exit .................................exits the program and returns to Windows
View Menu
Pump Scheduler ..........opens the SKC Pump Scheduler window
Sample Sheet ................opens the SKC Sample Sheet Setup window
Report ...........................loads a report fi le (.rpt) previously saved to a PC
Pump History ..............opens the SKC Pump History window
Archive History ...........loads a history fi le (.hst) previously saved to a PC
Real Time Monitor ......opens the SKC Real Time Monitor window
Tools Menu
Clear History ................clears the pump history
Clear Schedule .............clears the programmed pump schedule
Intermitt ent
Sampling .......................allows connected pump to be set to run at selected on/off intervals for a selected
total run time
Intermittent Sampling can only be used while the pump is connected to the PC.
About Menu ............................displays the DataTrac Software version number, pump firmware revision
number, and pump serial number
Figure 3. SKC DataTrac Pump Manager Window