SKC DataTrac for the Pocket Pump - Manual (Page 20)

18
Example Program
Add extra days to the program schedule
Click once on the +Day butt on. This will add 1 day to the Start Date and Stop Date
in the Program Edit Bar. Click once on Insert to place the program into the Pump
Program Scheduler.
Repeat the procedure to add an additional day to the Pump Program Scheduler until each day of the week has been
entered.
Set the desired Run Time Options
Go to the View menu and select Pump Sett ings. Click on the desired options (see page 16).
Write the program to the pump
Click once on the ToPump butt on. DataTrac will write all steps contained in the Pump Program
Scheduler to the pump.
Save the pump program to a PC
Go to the File menu and select the Save command. The program displayed in the Pump Program Scheduler will be
saved as a program fi le (.pgm). Programs may be saved for future use or editing.
Print the pump program
Go to the File menu and select the Print command. The contents of the Pump Program Scheduler will print.