SKC DataTrac for the Pocket Pump - Manual (Page 19)

17
Example Program
Example Program
This example program demonstrates how to use the Pump Program Scheduler window to set a program.
A sampling operation requires the pump to sample at a constant fl ow of 100 mL/min from 8:00 AM
to 4:00 PM daily for one work week. Enter the parameters as follows:
Clear Previous History/Schedule
In the SKC Pump Scheduler window, go to the Tools menu and select Clear History (if desired); this will erase the
history from the history display and the pump’s memory. Go to the Tools menu and select Clear Schedule (if desired).
This will erase the contents of the Pump Program Scheduler displayed on the PC screen and in the connected pump’s
memory.
Set the fl ow rate
Click once on the C. Flow butt on and then click once on the New Flow butt on.
The Set Flow window will open. Click once on the 100 butt on then click once on
OK. Click once on the Rate cell in the Program Edit Bar. Flow and 100 will appear in the Mode
and Rate cells in the Program Edit Bar.
Set the start/stop date
Click once on any Monday in the Calendar. The data is highlighted. Click once on the Start Date
cell in the Program Edit Bar. The date will appear in the cell. Click once on the Stop Date cell to
enter the same date into the cell.
Set the start time
Click once on the Clock at 8. The clock hands will point to 8:00 and 8:00 will appear in the
digital display next to the Clock. Click once on the AM butt on, and then click once on the Start
Time cell of the Program Edit Bar; 8:00 AM will appear in the cell.
Set the stop time
Click once on the Clock at 4. The clock hands will point at 4:00 and 4:00 will appear in the
digital display next to the Clock. Click once on the PM butt on, and then click once on the
Stop Time cell of the Program Edit Bar; 4:00 PM will appear in the cell.
The Duration cell will display 8 Hr, which is the length of the programmed operation.
Insert the program into the Pump Program Scheduler
Click once on the Insert butt on. The program will appear in the Pump Program Scheduler. The
program is still displayed in the Program Edit Bar. The Pump Program Scheduler contains a program,
which tells the pump to run at a constant fl ow of 100 mL/min from 8:00 AM to 4:00 PM on Monday.
The same operating parameters must be entered for each day of the week.
Click here
Click here
The completed program in the Program Edit Bar