HTP SuperStor Ultra Indirect Fired Water Heaters User Manual
Page 22
Advertising
22
LP-83 Rev. 3.24.14
Figure 14
– Typical Steam Boiler -
NOTE: On Typical Steam Boiler applications, the SSU indirect heat exchanger supply and return
connections must be below the water line from the boiler connection. The internal flow check or spring check must be used to avoid thermal
siphoning from the connected boiler. A basket strainer should also be used to avoid sludge and sediment getting into the pump or heat
exchanger.
Figure 15
– Live Steam Installation -
NOTE: Live Steam Installations are allowed with 80 and 119 gallon SSU/SSU-C models ONLY.
Advertising