IAI America IA-T-XA (ANSI standard CE mark agreement) - Manual (Page 120)

(2) Servo status
Mode flow:
Axis No.
Home position return Servo-ON axis in use
Servo
Motion command normal end
Push
(System reservation) (System reservation)
The axis No. can be changed with the PAGE UP and PAGE DOWN keys.
(3) Sensor input status
Mode flow:
Axis No.
Creep sensor Overrun sensor
(System reservation) Home position sensor
The axis No. can be changed with the PAGE UP and PAGE DOWN keys.
(4) Encoder status
Mode flow:
Axis No.
Full absolute status Over speed
(System reservation)
Count error Counter overflow
Multi-revolution error
Battery error Battery alarm
The axis No. can be changed with the PAGE UP and PAGE DOWN keys.
117