IAI America IA-T-XA (ANSI standard CE mark agreement) - Manual (Page 8)

When the Deadman switch is OFF, the screen
shown at the left is displayed. Pressing the ESC key
moves to the Mode Selection screen.
(Even when the Deadman switch is OFF, operations
in the mode not requiring servo ON are available.)
Cnct screen
When the MODE switch is flipped to AUTO,
connection to the controller is not established and
the screen shown at the left is displayed. In this
case, press the ESC key to move to the
reconnection (Cnct) screen.
Mode Selection screen
Flip the MODE switch to MANU, and press the F1
(OK) key to reconnect the controller.
This is the basic screen for all operations.
5