Janam XT85 - Manual (Page 37)

Resetting the XT Series Device XT85 User Manual
Janam Technologies LLC 4 ―1
4
Resetting the XT Series Device
Resetting
In addition to On (Resume) and Off (Suspend) functions, XT Series devices provide a range of
device reset (boot) procedures whose functions may be called upon when required.
 IMPORTANT NOTE!
Some device reset options irretrievably delete stored user data! Always read and
understand the parameters of selected reset procedures before execution.
On (Resume) / Off (Suspend) and Reset Functions
On (Resume) / Off (Suspend)
To Suspend or Resume XT Series device operation:
― Press the Red Power key once to suspend operation and press again to resume.
Note: Holding the Power key down for an extended
period of time will not reboot the device.
Warm Boot ( or Soft Reset)
During a Warm Boot, registries will be retained, SDRAM
will NOT be reset and Program memory used by
applications will be reset.
To initiate the warm boot (restart) process:
― Press the Yellow Function key and red Power
key simultaneously to immediately initiate a Warm
Boot.
Cold Boot (or Hard Reset)
After a Cold Boot, all settings and registries will be
retained. SDRAM will be reset and the program memory
used by applications will be reset.
― Press and hold Yellow Function key
TOGETHER with Enter key AND red Power
keys for 5 approximately seconds to initiate a
Cold Boot process.
Yellow Function Key
Red Power Key
Enter (return) Key
Escape Key