Janam XT85 User Manual
Page 47
Data Capture—Barcode Scanning
XT85
User Manual
Janam Technologies LLC
6
―5
B. Imager-based Configurations
This section is specific to XT Series configurations equipped with Adaptus Imager Technology.
Please see Section A for barcode scanning with XT Series configurations with Motorola SE965HP
laser scanning technology.
IMPORTANT NOTE!
A firmware upgrade is required to enable 2D barcode
scanning. Contact your authorized Janam dealer to
acquire the 2D unlock code for your device(s).
Unlock 2D Scanning
XT Series devices with Adaptus Imaging Technology can be upgraded in the field to
read 1D and 2D barcodes with a simple firmware upgrade (Part Number 2D-XP-1).
With each upgrade, a key code is provided than unlocks 2D scanning capability on the
device.
You will need to provide the product imager ID number so the appropriate six-digit key
code sequence can be assigned. To access the imager ID number, follow these steps:
To get your Imager ID number:
1. From the Windows Mobile Start screen, tap Settings (icon) > System (icon) >
XT85 Panel (icon) > Scanner (tab).
The displayed Imager ID information (Serial Number, S/N) is unique to each
device.
2. Record the Imager ID.
After receipt of your six-digit key code, follow these steps to enable 2D scanning:
1. Go to the Start Menu, tap Settings (icon) > System (icon) > scroll down to
XT85 Panel (icon) > Scanner (tab)
2. Enter your key code in the Password field then press the Unlock button.
4. Tap OK.
Barcode Examples
1D
2D