Janam XT85 - Manual (Page 43)

Data Capture—Barcode Scanning XT85 User Manual
Janam Technologies LLC 6 ―1
6
Data Capture—Barcode Scanning
Introduction
Janam XT Series devices are available with two barcode scanning technology options, each of
which is suited for varying end-user requirements, preferences and workspace environments.
This chapter covers each of the available XT Series barcode scanning technologies. Therefore,
some of the barcode functions described in this chapter may not apply to the XT Series
device(s) you are using. For that reason, and depending on the configuration of your XT Series
device(s), some information in this chapter may not apply.
If you have questions about the scanning technology utilized by specific XT Series device(s),
please contact your Janam dealer or Janam Technical Support at: +1.866.915.5311
Key Barcode Scanning Systems
The two key data capture technologies offered are:
 Laser: Motorola SE965HP Laser Scan Engine
Provides close-range and distance 1D barcode scanning and reads damaged or hard-to-
read barcodes.
 Imager: Honeywell Adaptus ® Imager
Provides omnidirectional 1D barcode scanning and is 2D scanning-ready (requires
firmware upgrade).
 IMPORTANT NOTE!
The following Barcode Scanning Demonstration and Setup material provides
Janam XT Series device users with fundamental barcode scanning information to
familiarize users with general scan functions. However, your devices’ barcode
scanning functions will likely be governed and/or managed by a third-party
application not covered in this manual.