Avenview SW-HDM3D-C5-8X8 - Manual (Page 17)

www.avenview.com 17
Setting:
Press Get button to read back device ID.
Press Set button to write device ID.
Linkage: Press Linkage button to read back all status
Open / Close: Press this button to Close or Open COM Port.
Mapping Button:
Select All Output:
Select “set all output”, and then select the source on main
menu. You can quickly set all output to the same source.
Unselect All Output:
Release output selection.
Select Input1~8-Output:
Select Input Source. Then select the output port icon.
For example:
Select input source 1. Then select output port one and two. The
video and audio will be sending to port one and two.