Avenview SW-HDM3D-C5-8X8 - Manual (Page 20)

www.avenview.com 20
Section 2: Specifications
Item Description
Units SW-HDM3D-C5-8X8 HDM3D-C5SW-R
Unit Description
8X8 HDMI Matrix Switch over CAT5
with 3D Support
HDMI 1.3 Receiver over CAT5 with 3D
Support
HDMI Compliance HDMI Deep Color & Full 3D
HDCP Compliance Yes
Video Bandwidth Single Link 225 MHz (6.75Gbps)
Supported Resolutions 480i / 480p / 720p / 1080i / 1080p60
Resolution and Distance
Full HD: (1080p) ~ 35meter (115feet) (CAT5e) / 40meter (130feet) (CAT6)
HD: (720p/1080i) ~ 50meter (165feet) (CAT5e) / 55meter (180feet) (CAT6)
Audio Support Surround Sound (up to 7.1 Ch.) or Stereo Digital Audio
Equalization - 8 Level Digital Control
Input TMDS Signal 1.2 Volts (peak-to-peak)
Input DDC Signal 5 Volts (peak-to-peak, TTL)
ESD Protection
- Human body model — ±15kV (air-gap discharge) & ±8kV (contact discharge)
- Core chipset — ±8kV
Input
8 x HDMI
1 x RS232
1 x RJ45 TMDS
1 x RJ45 DDC
1 x IR Socket for IR Receiver
Output
8 x RJ45 HDMI Signal
8 x RJ45 IR Control
9 x IR Socket for IR Blaster
1 x HDMI
HDMI Input Selection Push Button / IR Remote / RS232 Push Button / IR Remote
HDMI Source Control
Through IR Control Path from IR Receiver at Remote Receiver to IR Blaster at
Matrix Switch
IR Remote Control Electro-optical characteristics: = 25° / Carrier frequency: 20~60kHz
HDMI Connector Type A (19 pin female)
RJ45 Connector WE/SS 8P8C with 2 LED indicators
RS232 Connector DE-9 (9-pin D-sub Female)
3.5mm Connector
Earphone jack for IR blaster
[IR Main] IR control on all source
devices
[IR PASS-THROUGH 1~8] IR control on
individual source device
Earphone jack for IR receiver
[IR RECEIVER] Receives IR commands
from remote control
DIP Switch
[SW1~SW8] 2-pin for EDID & audio mode
[SW Main] 4-pin for operation & firmware update
Dimensions (L x W x H) 17” x 11” x 1.7” 3.3” x 2.4” x 1”
Power Supply 5V 6A DC Most not required
Power Consumption 60 Watt (max)
1.5 Watt (max) / provided by
SW-HDM3D-C5-8X8
Environmental
Operating Temperature
32˚ ~ 104˚F (0˚ to 40˚C)