Set spanning tree – ADC Modem MM701G User Manual
Page 25
Advertising
Chapter 3: Managing the Modem Using a Web Browser
MM701G User Manual
19
Set Spanning Tree
Spanning Tree eliminates loops in a LAN topology, ensuring that there is only one path (or link)
between any two nodes on a network. Use Spanning Tree protocol only when you have already
selected a Bridge session (as described in
“Set Up WAN Sessions” on page 23
) and when you
have more than one device (a PC only) on your LAN and when those devices have more than
one physical path connecting them.
1
Select
System
on the menu bar, then click
Configuration
to access the
System Configuration
page
.
2
Select
Enable
to activate the Spanning Tree protocol for all bridging sessions.
Advertising