ADC Modem MM701G User Manual
Page 61
Chapter 4: Managing the Modem Using the Console Port & Telnet
MM701G User Manual
55
4
View the statistics.
Parameter
Description
OperationalState
Valid entries are:
•
Handshaking is when the modem is making an attempt to
connect to a device on the other side of the G.shdsl line.
•
Training is when the modem is learning the connection
parameters.
•
Show Time is the actual connection time.
DataRate
Bit rate after the ATM headers have been removed.
DSPVersion
The modem DSP code can be upgraded—this is the current
version that is running on your system.
LastFailed
Displays the last state reached before start-up failed. This is used
for troubleshooting by technicians.
RemoteEncoderCoeffA
Displays the remote coefficient for channel A.
RemoteEncoderCoeffB
Displays the remote coefficient for channel B.
TransmissionPower
Displays the local transmission power in dB.
ReceiverGain
Displays the amplifying factor for incoming signal in dB.
Local SNRMargin
Actual value of the current Signal to Noise (SNA) ratio.
FramerSync
Displays the link status.