ADC Modem MM701G - Manual (Page 51)

Chapter 4: Managing the Modem Using the Console Port & Telnet
MM701G User Manual 45
S
ETTING
U
P THE
WAN
For Bridge or Router mode you need to set the WAN VPI/VCI as supplied by your service
provider.
1 From the Main Menu , select WAN Setup . The WAN Session screen displays.
The WAN Session screen presents data related to each session defined for your Bridge/Router.
The following table provides a description of the four fields displayed on the WAN Session
screen.
Session group 1 - 16
1. Session 1 Bridge RFC1483 Bridge (Enabled)
2. Session 2 IPoA-Router RFC1483 Router (Enabled)
3. Session 3 PPP-Router PPPoA (Enabled)
4. Session 4 UNDEFINED
5. Session 5 UNDEFINED
6. Session 6 UNDEFINED
7. Session 7 UNDEFINED
8. Session 8 UNDEFINED
9. Session 9 UNDEFINED
10. Session 10 UNDEFINED
11. Session 11 UNDEFINED
12. Session 12 UNDEFINED
13. Session 13 UNDEFINED
14. Session 14 UNDEFINED
15. Session 15 UNDEFINED
16. Session 16 UNDEFINED
17. Get next group
Select session for editing (Return to exit) ->
Column Description
1 The session number—sessions 1-16 are displayed on the first page of the
screen and sessions 17-31 are displayed on a the second page of the WAN
session screen.
Example: 2. Session 2
2 Session name—up to 15 characters may be entered for a descriptive name
for a session. No spaces are allowed. Use this field to help identify each of
your sessions.
Example: IPoA-Router
3 Session protocol—configured for this session.
Example: RFCF1483 Router
4 Session status indicator—enabled or disabled.