LEDGlow Million Color SMD LED Underbody Lighting Kit with Bluetooth Connectivity - Manual (Page 7)

LEDGlow Mobile App Control Functions
1. Power Button – Powers Kit On and Off
2. Color Wheel/Color Control
 Slide Your Finger for a Custom Color
 Tap a Specific Color to Snap to 7 Preset Solid Colors
 Blue

Green
 Red
 White
 Yellow
 Teal

Purple
Color Control
 Press to Toggle Between Primary and Secondary
Colors
 O – Changes Primary Color

+ – Changes Secondary Color
3. Brightness Control Slider
 Changes Brightness of Selected Color
 Primary and Secondary Colors Change Independently
4. Speed Control Slider

Adjusts the Speed of the Selected Pattern
5. Mode Selection Drop Down Box
 Press to Select from 10 Distinct Patterns
6. Preset Mode Buttons
 The Active Preset Pattern Number is Red
 Inactive Presets are Black
 Save up to 5 Custom Lighting Configurations
7. Settings Button
 Independently Control Underbody and Interior Lights On & Off
8. Help Button
 Press to Visit Help Section With Tutorials, FAQs & Troubleshooting
Guides.
9. Save Button
 Saves the Current Active Configuration to the Active Preset Button
Color Wheel Primary and Secondary Color Control Functions
Solid Color Underbody Tubes Interior Tubes
Sweeping Underbody Tubes Secondary Color in the
Underbody Pattern & Solid
Illumination for Interior
KITT Scanner Underbody Tubes Secondary Color in the
Underbody Pattern & Solid
Illumination for Interior
KARR Scanner Underbody Tubes Secondary Color in the
Underbody Pattern & Solid
Illumination for Interior
Color Chase Underbody Tubes Secondary Color in the
Underbody Pattern & Solid
Illumination for Interior
Chase vs. Chase Underbody Tubes Secondary Color in the
Underbody Pattern & Solid
Illumination for Interior
Double Chase Underbody Tubes Secondary Color in the
Underbody Pattern & Solid
Illumination for Interior
Chase w/ Strobe Underbody Tubes Secondary Color in the
Underbody Pattern & Solid
Illumination for Interior
Retro Scanner Underbody Tubes Secondary Color in the
Underbody Pattern & Solid
Illumination for Interior
Fading Colors Underbody Tubes Secondary Color for the
Underbody Pattern &
Bluetooth Connectivity and Control Box Functions
Control Box LED Color Indication
LED Off Power save mode enabled or not powered
Solid Red Powered but not connected to a device
Solid Yellow In pairing mode, ready to pair to a device
Flashing Yellow Searching for a device to connect to *iOS Only
Flashing Green Connecting & authenticating the connection
Solid Green Connected and ready to use
Button Functions
Powers the kit on/off. To enter pairing mode turn the kit off, press and hold
this button until the LED turns solid yellow.
Press to change between 5 preset speed modes (when applicable). Press and
hold to slowly go from 0%-100%, release the button at your desired speed.
Press to change color on underbody kit. Press and hold to slowly cycle
through all color options, release at your desired color.
+
Press to change color on add-on interior tubes. Press and hold to slowly cycle
through all color options, release at your desired color.
Press to select one of the 10 preprogrammed patterns available for this kit.