LevelOne WCS-6050 - Manual (Page 51)

Network Camera User’s Manual
51/54
first time?
A6: Make sure the subnet of network camera is same as your PC. If the local
area network supports DHCP, the camera is “Get IP address automatically” in
the “Network” page default. If the local area network does not support DHCP,
change your PC IP address to “192.168.0.xxx”.
Q7: How can I restore the network camera to default value?
A7: Use a gem clip to press on the inside button until the led flashing. After three
cycles of the flashing, the network camera begins to restore default value.
Q8: Infrared led does not light up?
A8: Check 「 Configuration>Audio and Video>Infrared LED Control 」 is Auto or
Manual. Turn on.
Q9: The network camera cannot focus accurately.
A9:
(1) The lens is dirty or dust is attached. Clean the lens with lens cleaner. And
then adjust the camera focus manually.
(2) The image may be out of focus. If the object is too near, move the object
away from Network Camera.
Q10: The cover of network camera is warm. Is it normal?
A10: Network camera is a precision device. The internal material has the
operational temperature, and it is normal when user touch the cover feels warm.
It is recommended to put the network camera at aired place and away from any
other device.
Q11: What is the scope of wireless network camera connecting AP?
A11: The scope of wireless connection is different form the environment. The