LevelOne WCS-6050 - Manual (Page 8)

WCS-6020 / WCS-6050 User Manual
8/54
4. Connect the external power supply to the network camera
Connect the attached power adapter to the DC power jack of the Network
Camera. Note: Use the power adapter, 12VDC, included in the package and
connect it to wall outlet for AC power.
Once you have installed the Network Camera well and powered on, the camera
will do self-rotation and then the red LED will turn on and green LED will flash
every second. It means that the system is booting
5. General I/O Terminal Block
If you have external devices such as sensors and alarms, connect it to the I/O
terminal block.
Power
Socket
1: Power
2: Digital output
3. Digital input
4. Ground