Alliance Laundry Systems CABINET FREESTANDING 9001889R7 - Manual (Page 4)

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
© Copyright 2011, Alliance Laundry Systems LLC
All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any
means without the expressed written consent of the publisher.
9001889 2
Table of
Contents
Introduction......................................................................................... 3
Model Identification ............................................................................. 3
Programming ...................................................................................... 4
Setup of the Machine ............................................................................ 4
Version of Control ................................................................................ 7
Language on Display (Version 1.15 and later ONLY) .................... 7
Setup of the Chemical Hold Feature
(Version 1.11 and later ONLY)...................................................... 7
Program Storing Mode ......................................................................... 7
Explanation of the Step Functions........................................................ 8
Example Making a New Program......................................................... 14
Edit a Cycle........................................................................................... 18
Change a Complete Step.................................................................. 18
Changing the Time of a Step ........................................................... 20
Delete a Step .................................................................................... 22
Insert a Step...................................................................................... 23
Delete a Cycle....................................................................................... 25
Reloading Previous Settings ................................................................. 26
Cycle Count .......................................................................................... 27
Reading Cycle Count ....................................................................... 27
Calibration of the Machine ................................................................... 28
Speed Calibration.................................................................................. 29
Pre-Programmed Cycles .................................................................... 30
Inverter Drive Error Codes ............................................................... 56