LevelOne WAP-6101 - Manual (Page 21)

2.2.2 One Master and a series of connected Slaves
This device also support universal repeater function, you can easily extend the wireless
network with a series repeaters that are wireless concatenated to build up the wireless
network without running Ethernet cables to each repeater.
As illustrated in above figur e, if you intend to deploy 4 APs (AP1 ~ AP4) to create a “Staff”
wireless network, you can follow the procedure below:
Step Button Description
1
Set AP1 in Master Mode,
and configure it via web
UI.
1. Make sure AP1 is in Master Mode (WiFi LED
should be “Green” color, if not, you have to
toggle its AP mode via pressing the WEC button
for 8 seconds)
2. Login in to AP1 web UI and configure the
wireless settings as what you want (LAN IP,
SSID, encryption key, etc..).
2
Set AP2, AP3, AP4 in
Slave Mode.
1. Make sure AP2 / AP3 / AP4 is in Slave Mode
(WiFi
LED should be “Amber” color, if not, you
have to toggle its AP mode via pressing the
WEC button for 8 seconds)