LevelOne WAP-6101 - Manual (Page 49)

3.3.2 System Status
3.3.2.1 Web Log
1. Log Types: You can select the log types to be collected in the web log area.
There are “System”, “Attacks”, “Drop”, and “Debug” types for you to select.
2. Web Log: You can browse, refresh, download, and clear the log messages.
3.3.2.2 Syslog
This device also can export system logs to specific destination by means of syslog
(UDP) and SMTP(TCP). With enabled Syslog function, this device will send log to a
certain host periodically. You need to install a syslog utility on a host to receive
syslogs
The items you have to setup include:
1. IP Address for syslogd: Host IP of destination where syslog will be sent to.
Check Enable to enable this function.