LevelOne WAP-6101 - Manual (Page 53)

3.3.3.4 Others
In this section you can do system backup, reset to default, system reboot settings and
ping test.
1. Backup Setting : You can backup your settings by clicking the “Backup” button
and save it as a bin file. Once you want to restore these settings, please click
Firmware Upgrade button and use the bin file you saved.
2. Reset to Default: You can also reset this device to factory default settings by
clicking the “Reset“ button.
3. Reboot : You can also reboot this device by clicking the “Reboot“ button.
4. Domain Name or IP address for Ping Test: This allows you to configure an IP,
and ping the device. You can ping a specific IP to test whether it is alive.
5. Domain Name or IP address for Traceroute: Traceroute is a network
diagnostic tool for displaying the route (path) and measuring transit delays of
packets across an IP network. Traceroute proceeds unless all (three) sent
packets are lost more than twice, then the connection is lost and the route cannot
be evaluated. Ping, on the other hand, only computes the final round-trip times
from the destination point