Ativa AWGR54 - Manual (Page 12)

Knowing your Router
10
The Router has been designed to
be placed on a desktop. All of the
cables exit from the rear of the
Router for better organization and
utility. The LED indicators are easily
visible on the front of the Router to
provide you with information about
network activity and status.
1. Power/Ready LED
When you apply power to the Router or restart it, a short period of time
elapses while the Router boots up. During this time, the Power/Ready LED
blinks. When the Router has completely booted up, the Power/Ready LED
becomes a SOLID light, indicating the Router is ready for use.
OFF Router is OFF
Blinking Blue Router is Booting Up
Solid Blue Router is Ready
2. Wireless Network LED
OFF Wireless Network is OFF
Blue Wireless Network is Ready
Blinking Blue Indicates Wireless Activity
3. Wired Computer Status LEDs
These LEDs are labeled 1–4 and correspond to the numbered ports on the
rear of the Router. When a computer is properly connected to one of the
wired computer ports on the rear of the Router, the LED will light. BLUE
means a 10/100Base-T device is connected. When information is being sent
over the port, the LED blinks rapidly.
OFF No Device is Linked to the Port
Blue 10/100Base-T Device Connected
Blinking Blue Port Activity
(1)
(2)
(3)
(5)
(4)