Ativa AWGR54 - Manual (Page 62)

Using the Web-Based Advanced User Interface
60
Setting MAC Address Filtering
The MAC address filter is a powerful security feature that allows you
to specify which computers are allowed on the network. Any computer
attempting to access the network that is not specified in the filter list will be
denied access. When you enable this feature, you must enter the MAC address
of each client (computer) on your network to allow network access to each.
(1)
(2)
(3) Not shown, scroll down
to the bottom of the
page to click “Apply
Changes”.
To enable this feature, select “MAC Address Filtering” and click “Enable” (1) .
Next, enter the MAC address of each computer on your network by clicking
in the space provided
(2) and entering the MAC address of the computer
you want to add to the list. Click “Add” (3) , then “Apply Changes” to save the
settings. You can have a MAC-address-filtering list of up to 32 computers.
Note: You will not be able to delete the MAC address of the computer you
are using to access the Router’s administrative functions (the computer you
are using now).