Ativa AWGR54 - Manual (Page 18)

Connecting and Configuring your Router
16
Welcome Screen
After you insert the CD into your
CD-ROM drive, the Wizard’s welcome screen
will appear. Make sure you have not connected
the Router at this point. If you have
connected your Router, please reconnect your
computer directly to the modem. Click “Run
the Easy Install Wizard” when you are ready to
move on.
Progress Screen
The Easy Install Wizard will show you a
progress screen each time a step in the setup
has been completed. Each time you see the
progress screen, click “Next” when you are
ready to move to the next step.
Examining Settings
The Wizard will now examine your computer’s
network settings and gather information
needed to complete the Router’s connection
to the Internet. When the Wizard is finished
examining your computer, click “Next”
to continue.
Multiple Network Adapters Found Screen
If you have more than one network adapter
installed in your computer, this screen will
appear. If you have more than one network
adapter installed in your computer, you
must designate for the Wizard which adapter
is connected to your modem. To do this,
select it from the list and click “Next”. If
you are not sure which adapter to choose,
select the adapter at the top of the list. If
you mistakenly choose the wrong adapter
now, you will be able to choose a different
one later.