Ativa AWGR54 - Manual (Page 30)

Alternate Setup Method
28
Step 4 Configure your Router for Connection to your
Internet Service Provider (ISP)
The “Internet /WAN” tab is where you will set up your Router to connect
to your Internet Service Provider (ISP). The Router is capable of connecting
to virtually any ISP’s system provided you have correctly configured the
Router’s settings for your ISP’s connection type. Your ISP connection settings
are provided to you by your ISP. To configure the Router with the settings
that your ISP gave you, click “Connection Type”
(A) on the left side of the
screen. Select the connection type you use. If your ISP gave you DNS settings,
clicking “DNS”
(B) allows you to enter DNS address entries for ISPs that
require specific settings. Clicking “MAC address” (C) will let you clone your
computer’s MAC address or type in a specific WAN MAC address, if required
by your ISP. When you have finished making settings, the “Internet Status”
indicator will read “connection OK” if your Router is set up properly.
(A)
(B)
(C)