Teledyne LeCroy CP031 - Manual (Page 23)

Instruction Manual
923362-00 Rev A 17
Certifications
This section contains the instrument’s Electromagnetic Compatibility (EMC), Safety and Environmental
certifications.
EMC Compliance
EC Declaration of Conformity - EMC
The probe meets intent of EC Directive 2004/108/EC for Electromagnetic Compatibility. Compliance was
demonstrated to the following specifications as listed in the Official Journal of the European
Communities:
EN 61326-1:2006, EN 61326-2-1:2006 EMC requirements for electrical equipment for measurement,
control, and laboratory use.
E LECTROMAGNETIC E MISSIONS :
CISPR 11:2003, Radiated and Conducted Emissions Group 1, Class A 1 2
E LECTROMAGNETIC I MMUNITY :
EN 61000-4-2:2001 Electrostatic Discharge, 4 kV contact, 8 kV air, 4 kV vertical/horizontal coupling
planes
3
EN 61000-4-3:2006 RF Radiated Electromagnetic Field, 3 V/m, 80-1000 MHz; 3 V/m, 1400 MHz - 2 GHz; 1
V/m, 2 GHz - 2.7 GHz
3
1 Emissions which exceed the levels required by this standard may occur when the probe is connected to a test
object.
2 This product is intended for use in nonresidential areas only. Use in residential areas may cause
electromagnetic interference.
3 Meets Performance Criteria “B” limits of the respective standard: during the disturbance, product undergoes a
temporary degradation or loss of function or performance which is self-recoverable.
E UROPEAN C ONTACT :
Teledyne LeCroy Europe GmbH
Waldhofer Str 104
D-69123 Heidelberg
Germany
Tel: (49) 6221 82700
Australia & New Zealand Declaration of Conformity
—EMC
Probe complies with the EMC provision of the Radio Communications Act per the following standards, in
accordance with requirements imposed by Australian Communication and Media Authority (ACMA):