Teledyne LeCroy Protocol PCI Express Script Automation Test Tool - Manual (Page 8)

Teledyne LeCroy PCI Express Script Automation Test Tool User Manual
4
2 Script Automation Test Tool
The PCI Express™ Script Automation Test Tool runs as a stand-alone (automated) application. The PCI Express
Script Automation Test Tool uses the PETracer Automation™ API to communicate commands to the PETracer and
PETrainer platforms. It generates the stimulus for the test, records the traffic, and runs a Verification script to check
the test result.
You can configure and operate a PETracer™ Analyzer and PETrainer™ Exerciser and sequentially run the tests
described in this user manual. The PCI Express Script Automation Test Tool starts the recording and then measures
the performance characteristics of the DUT according to the standards defined by the appropriate test specification.
2.1 Graphical User Interface
The PCI Express ™ Script Automation Test Tool application has a graphical user interface. This example shows the
application running Endpoint tests.
Figure 1. PCI Express Script Automation Test Tool Graphical User Interface