Teledyne LeCroy SAS_SATA Protocol Suite Verification Script Engine Reference Manual - Manual (Page 39)

39
9.9 DontSendTraceEvent()
This function specifies that the event specified in this function should not be sent to script.
Format :
DontSendTraceEvent ( event )
Parameters
event
Values are the same as for SendTraceEvent() (see above).
Example
…
if( SomeCondition )
{
DontSendTraceEvent( _FRM_AF_OPEN );
}
9.10 SendTraceEventOnly()
This function specifies that ONLY the event specified in this function will be sent to the script.
Format :
SendTraceEventOnly( event )
Parameters
event
Values are the same as for SendTraceEvent() (see above).
Remark
This function may be useful when many events are to be sent, yet you need to send only one
kind of event and turn off the rest.
Example
…
if( SomeCondition )
{
SendTraceEventOnly (_FRM_AF_OPEN );
}
9.11 SendAllTraceEvents()
This function specifies that ALL trace events relevant for the selected transaction level will be
sent to the script.
Format :
SendAllTraceEvents ()
Example
…
SendAllTraceEvents ( );