Teledyne LeCroy USB Analyzer Automation Manual - Manual (Page 141)

Teledyne LeCroy Automation API Reference Manual for USBTracer, USB Advisor, and Voyager USB Protocol
Suite
141
Set the Default Network Protocol
1. In the Distributed COM Configuration Properties dialog box, click the Default Protocols tab.
The following screen displays. TCP/IP should appear at the top of the list. If it does not,
use the Move Up button to move it to the top of the list. If the protocol does not appear
at all, you must add it using the Add button.
2. Click OK to close the Distributed COM Configuration Properties dialog box.
Your PC is now configured to run USBTracer/Trainer, USB Advisor, and Voyager USB
Protocol Suite Automation.