Handset, cellular, and mobile computing protocols, Digrf 3g, Digrf 4g – Teledyne LeCroy Serial Data Debug Solutions User Manual
Page 118: D-phy (csi-2/dsi), M-phy, Using the digrf 3g option, Using the digrf 3g option overview, Digrf 3g decode setup detail, Serial data debug solutions 118
Serial Data Debug Solutions
118
919586 RevA
Handset, Cellular, and Mobile Computing Protocols
Handset, Cellular, and Mobile Computing Protocols Overview
DigRF 3G
is a Mobile Industry Processing Interface (MIPI) standard for wireless mobile RFIC to BBIC mobile
device interfaces.
The standard is maintained by MIPI Alliance. Additional information, including the specification, can be found at
Number of Lines
Data rate
Synchronous or Asynchronous
2
312 Mb/s
Asynchronous
DigRF 4G
is a Mobile Industry Processing Interface (MIPI) standard for wireless mobile RFIC to BBIC mobile
device interfaces.
The standard is maintained by MIPI Alliance. Additional information, including the specification, can be found at
Number of Lines
Data rate
Synchronous or Asynchronous
2
312 Mb/s
Asynchronous
D-PHY (CSI-2/DSI)
is another Mobile Industry Processing Interface (MIPI) standard.
The standard is also maintained by MIPI Alliance. Additional information, including the specification, can be
found at
Number of Lines
Data rate
Synchronous or Asynchronous
2
Up to 1 Gb/s
Asynchronous
M-PHY
is another Mobile Industry Processing Interface (MIPI) standard.
The standard is also maintained by MIPI Alliance. Additional information, including the specification, can be
found at
Number of Lines
Data rate
Synchronous or Asynchronous
2
Up to 1 Gb/s
Asynchronous
Using the DigRF 3G Option
Using the DigRF 3G Option Overview
The DigRF 3G option displays the digital conversion of I and Q RF signals, and then displays the entire frame
structure, including the Sync field, Header, Payload Size coding, and Payload.
Note: Ask your local LeCroy representative for more information about any Serial Data Debug Solution
Protocols or Toolkits using the Contact LeCroy for Support (on page 199) topic.
DigRF 3G Decode Setup Detail
For general information about using controls shown on the main Serial Decode dialog, refer to Accessing The D
and TD Supported Protocol Toolsets (on page 13).