Teledyne LeCroy QPHY-USB3-Tx-Rx - Manual (Page 13)

QPHY-USB3-Tx-Rx Software Option
917719 Rev A
13
Creating Custom Configurations
Beginning with any of the pre-loaded configurations,
1. Click on the Test Selector tab to change what tests you would like to be included in your new
configuration.
2. Click on the Variable Setup tab to change the variables for your new configuration.

For additional information, refer to the QPHY-USB3-Tx -Rx Variables section of this manual.
3. Click on the Limits tab to change which limit set should be used for your new configuration

For additional information, refer to the QPHY-USB3-Tx -Rx Limits section of this manual.
4. Once a change has been made to any of these sec tions, the Save As button is enabled at the bottom of
the dialog.
5. Clicking the Save As button prompts you for a new configuration name and description.
Note: If a Custom Configuration w as used for the procedure, the Save button is also enabled on the bottom of the dialog. Clicking this button
updates the current configuration w ith new changes. Additionally, if the user does not w ish to save their changes, they can chose to run
QualiPHY w ith the variables set as the w ant w ithout saving. How ever, w hen the us er attempts to sw itch to another configuration, the system
prompts to save or abandon the current configuration.
6. Once a custom configuration is defined, script variables and the test limits can be changed by using the
Variable Setup and Limits Manager from the Edi t/View Configuration window.