Terk DTOC User Manual - Manual (Page 10)

9
D
TOC
Mounting the DTOC to a standard mast
(continued)
4. Attach the arm to the base.
Find one of the screws,
washers, and nuts included in
the package.
First, set the washer and nut
in the mounting well. Then
position the arm over the other
side of the well. Attach the arm
to the base as shown here.
5. Attach the antenna to the arm.
Find the other screw, washer,
and nut.
First, set the washer and nut in
the antenna's mounting well.
Then position the arm over the
other side of the well. Attach
the arm to the antenna as
shown here.