Terk DTOC User Manual - Manual (Page 9)

8
Mounting the DTOC to a standard mast
D
TOC
1. Orient the antenna base.
Make sure the base is oriented
correctly for the direction you
want to point the antenna. Use
the illustration on the left as a
guide.
Mounting
Well
Antenna points this way
...
...or this way
.
2. Attach the clamp assemblies to
the base.
Find the two U-Bolts, the four
wing nuts, and the two clamps
included in this package.
Insert each U-Bolt into the base
as shown here. Then position a
clamp and two wing nuts on the
end of each of U-Bolt as shown
here.
Screw Cover
Clamp
Wing Nut
U-Bolt
continues on next page...
3. Mount the base to the mast
(not included).
Slide the antenna clamp
assembly over the mast as
shown here, positioning the
mast between the clamp and
the antenna.
Position the DTOC antenna as
high as possible on the mast.
Orient the base in the direction
you want. Then tighten the
clamps and wing nuts securely
onto the mast.