Terk DTOC User Manual - Manual (Page 12)

11
D
TOC
Connecting the DTOC to a TV
1. Run the provided coaxial cable
from the antenna towards
your television set. Connect
the coaxial cable to the ANT
jack on the supplied amplifier
insert.
2. Connect the built-in coaxial
cable on the amplifier insert
to the antenna input jack on
your TV or converter box.
Note: If you want to split
the signal coming from
the antenna, connect the
short coaxial cable built
into the amplifier insert to
your splitter (splitter sold
separately). DO NOT PUT THE
SIGNAL SPLITTER BETWEEN
THE AMPLIFIER INSERT AND
THE ANTENNA.
3. After all other connections
are made, connect the power
adapter into the amplifier
insert. Plug it into a standard
AC outlet.
Important: This power adapter
should be plugged in so that it
stays vertical or lays flat.
The amplifier insert should
always be located indoors.
4. Turn on your TV and scan for
channels.
Important: Channel line-ups
change from time to time.
For best performance, do a
channel scan periodically to
check for updates.
TV
DTOC
Coaxial Cable
Amplifier
Insert
ANTENNA
TV/STB
The amplifier insert connects
directly to the back of your TV
via the built-in cable connector.