Warner Electric Dairy Cap Chuck User Manual
Page 16
Advertising
16 Warner Electric • 800-825-9050
P-2021
Figure 57
Figure 54
Figure 55
Figure 56
Once the spacer is placed on the shaft. Apply
thin layer of grease to the seal. See figure 54.
Apply thin layer of grease to black driver magnet
that is attached to the adjustable end plate. See
figure 55.
Slide adjustable end plate and magnet onto shaft.
See figure 56.
Slide hysteresis magnet onto shaft so that it rests
on the black driver magnet. See figure 57.
Advertising