Warner Electric Dairy Cap Chuck - Manual (Page 4)

4 Warner Electric • 800-825-9050 P-2021
Set Screws
Figure 10
To set torque loosen the two set screws using
3mm Hex wench. Tighten set screws to 8-10 lb-
in. Over tightening is not necessary and will strip
the screws or possibly damage the housing body.
See figure 7.
Align visual marking with desired setting. Using a
face spanner wrench (YTL2-0002). Then tighten
down set screws. See figure 8.
Remove turret cover from top of machine.
See figure 9.
Remove the two bolts that hold the unit to the
machine. Set the bolts aside for later use. See
figure 10.
Figure 7
Figure 8
Figure 9