Warner Electric Dairy Cap Chuck - Manual (Page 5)

Warner Electric • 800-825-9050 P-2021 5
Figure 14
Remove old unit from the machine. See figure 11.
Install new unit onto the machine. Use original two
bolts to secure unit from Figure 15. See figure 12.
Adjust gear position where necessary using 3mm
Hex wrench. Apply proper food grade lubricant to
gears. See figure 13.
Clutch installation is now complete. Install
remainder of clutches in the same manner. Adjust
clutch torque and machine turret height as needed.
See figure 14.
Figure 11
Figure 12
Figure 13