Acumen EON-2028HS - Manual (Page 18)

GETTING GOING
LAP
Step 1: Use the Connector with one end clamp to the watch and the
other end connect with the PC Interface and Charger (for EON-
2028HS) or Charger (for EON-2027HS). Make sure the three pins in the
clamp are properly in contact with the three contacting points on the
watch. (as shown in Figure 2 & 3)
CAUTION - ONLY CHARGE WITH A RECHARGEABLE, LITHIUM
BATTERY (LIR 2032) AND THE 110-VOLT (1) OR 230-VOLT (2) AC/DC
TRANSFORMER PROVIDED. OTHER BATTERY AND TRANSFORMER WILL
CAUSE INJUREY AND DAMAGE.
*(1) For US only (2) For European country
The watch must be fully charged before its
initial use. When the watch displays ìLOW
BATT.î (as shown in Figure 1) means the battery
in your watch need to be charged, please follow
the below sequences to charge the battery:
Charging the Battery
Part I
14
!
Fig.2 Fig.3
Fig.1